Cutting Rule

Model Number

DUREX Serise.(Edge-hardened Rules)

A.DUREX Series.(Edge-hardened Rules)

DUREX Series is the most commonly used rule with its ideal combination of hardness and flexibility 52° edge is standard.
42° angle requires less cutting pressure, gives a longer cutting life and reduces slivers and dust.

Decarburisation provides good bendability. It is edge hardened from 52Rc to 62Rc to increase rule life. Available with shaved or ground edges up to 50mm(1.968”) high in all edge configurations All DUREX series are designed for use with automated beding equipment(Rull processor)

SUPEREX
Extremely bendable to an angle of 150 with very high wear resistance. Ideal for complicated design, or wherever tight radius bends are needed.

	Standard	Available	Tolerance
Thickness(mm) Height(mm) Hardness(Hrc) Edge Type Bevel Form Edge hardening method Max.angle of Mini.Bend Radius	0.71(2PT) 23.80(0.937") Body:31 Edge:52 Shaved CF Laser 150 0.3R	0.45~0.17(1.3pt~2pt) 23.32(0.918")~ Ground CFDB, SF, SFDB Induction	±0.01 ±0.02 ±1(Body)

DUREX-S
Very good bendability , Has outstanding flexibility and durability. It's suitable for automatic bending machinery and bends to an angle of 150

	Standard	Available	Tolerance
Thickness(mm) Height(mm) Hardness(Hrc) Edge Type Bevel Form Edge hardening method Mini.Bend Radius	0.71(2PT) 23.80(0.937") Body:34 Edge:56 Shaved CF Laser 130 0.3R	0.45~1.07(1.3pt~3pt) 23.32(0.918")~ Ground CFDB, SF, SFDB Laser/Induction	±0.01 ±0.02 ±1(Body) Max. angle of
Used for : Cardboard,corrugated board,labels,post cards...

DUREX-M
DUREX-M rule has the excellent bending properties with the long service life of an extra hard cutting edge.

	Standard	Available	Tolerance
Thickness(mm) Height(mm) Hardness(Hrc) Edge Type Bevel Form Edge hardening method Max. angle of Mini.Bend Radius	0.71(2PT) 23.80(0.937") Body:36 Edge:56 Shaved CF Induction 130 0.5R	0.45~1.07(1.3pt~3pt) 23.32(0.918")~ Ground CFDB, SF, SFDB Laser/Induction	±0.01 ±0.02 ±1(Body)

DUREX-H
Resists extra impact. For cutting hard plastics and other difficult materials.

	Standard	Available	Tolerance
Thickness(mm) Height(mm) Hardness(Hrc) Edge Type Bevel Form Edge hardening method Max. angle of Mini.Bend Radius	0.71(2PT) 23.80(0.937") Body:42 Edge:56 Shaved CF Laser 120 0.5R	0.45~1.07(1.3pt~3pt) 23.32(0.918")~ Ground CFDB, SF, SFDB Laser/Induction	±0.01 ±0.02 ±1(Body)
Used for : Plastic,thin gaskets,foils,puzzles,...

B.AMAX Series.(Through-hardened Rules)
Amax series is for straight work,slight bends and circular bends 1/8" diameter with AMAX55 and 1/4" diameter with AMAX65 It is ideal for
abrasive materials,gasket,rubber, pvc materials, leather etc.

AMAX55
Amax55 is excellent thru-harden rule with good hardeness ratio and is suitable for slightly abrasive materials.

	Standard	Available	Tolerance
Thickness(mm) Height(mm) Hardness(Hrc) Edge Type Bevel Form Edge hardening method Max. angle of Mini.Bend Radius	0.71(2PT) 23.80(0.937") Body:42 Edge:42 Shaved CF None(Thru-harden rule) 90 1.0R	0.45~0.71(1.3pt~2pt) 23.32(0.918")~ Ground CFDB, SF, SFDB	±0.01 ±0.02 ±1(Body)
Used for : Cardboard,corrugated board,labels,post cards...

AMAX65
Amax65 that can be bent 90 degree is very hard rule and offers the highest stability and performance during difficult cutting operations like abrasive materials.

	Standard	Available	Tolerance
Thickness(mm) Height(mm) Hardness(Hrc) Edge Type Bevel Form Edge hardening method Max. angle of Mini.Bend Radius	0.71(2PT) 23.80(0.937") Body:48 Edge:48 Groun CF None(Thru-harden rule) 90 1.0R	0.45~0.71(1.3pt~2pt) 23.32(0.918")~ CFDB, SF, SFDB	±0.01 ±0.02 ±1(Body)
Used for : Gaskets,rubber,polywood,cork,felt,beer mats,...

C.FINE Series.

FINE30
Precision ground rule with superior bendability.Ideal for labels, plastics and materials that have elasticity and whenever extreme sharpness is repuired.

	Standard	Available	Tolerance
Thickness(mm)	0.45(1.3PT)/0.53(1.5PT)0.71(2PT)		±0.01
Height(mm)	23.80(0.937")	7.0(0.275")~	±0.01
Hardness(Hrc)	Body:32 Edge:56	Body:34~38	±1(Body)
Edge Type	Ground
Bevel Form	CF	CFDB, SF, SFDB
Edge hardening method	Induction
Max. angle of Mini.Bend Radius	150 0.3R(In case of 2PT, Body Hrc 32)

FINE45(52)
A very precision ground edge rule. Edge hardened to 56Rc on a excellent bendable body.Ideal for cutting labels, cotated paperboard, plastics, gaskets, membrane switchs, name plates, laminated folding cartons, etc.

	Standard	Available	Tolerance
Thickness(mm)	0.45(1.3PT)/0.53(1.5PT)0.71(2PT)		±0.01
Height(mm)	23.80(0.937")	7.0(0.275")~	±0.01
Hardness(Hrc)	Body:34 Edge:56	Body:34~38	±1(Body)
Edge Type	Ground
Bevel Form	CF	CFDB, SF, SFDB
Edge hardening method	Induction
Max. angle of Mini.Bend Radius	150 0.3R(In case of 2PT, Body Hrc 34)

LABEL RULE
Precision ground rule with extremely sharp cutting edge.

	Standard	Available	Tolerance
Thickness(mm)	0.45(1.3PT)	0.3/0.4	±0.01
Height(mm)	8.0(0.315")	7.0(0.275")~	±0.01
Hardness(Hrc)	Body:32 Edge:56	Body:30~38	±1(Body)
Edge Type	Ground
Bevel Form	CF	CFDB, SF, SFDB
Edge hardening method	Induction
Max. angle of Mini.Bend Radius	150 0.3R(In case of 2PT, Body Hrc 34)

D.VF Series.

FINE30
A fine ground edge makes it an ideal rule for cutting more difficult and hard materials like gasket, rubber, vacumn forming, carpet, carsheet etc.

	Standard	Available	Tolerance
Thickness(mm)	1.07(3PT)	1.42(4PT)	±0.01
Height(mm)	23.80(0.937")	50.0(1.969")	±0.02
Hardness(Hrc)	Body:37 Edge:59	Body:34~38	±1(Body)
Edge Type	Ground
Bevel Form	CF	CFDB, SF, SFDB
Edge hardening method	Induction
Max. angle of Mini.Bend Radius	90 1.5R